HATA KODLARI ve ANLAMLARI

IE Errors

Error Number	Error Message
100	Continue
101	Switching Protocols
200	OK
201	Created
202	Accepted
203	Non-Authoritative Information
204	No Content
205	Reset Content
206	Partial Content
300	Multiple Choices
301	Moved Permanently
302	Moved Temporarily
303	See Other
304	Not Modified
305	Use Proxy
400	Bad Request
401	Unauthorized
402	Payment Required
403	Forbidden
404	Not Found
405	Method Not Allowed
406	Not Acceptable
407	Proxy Authentication Required
408	Request Time-Out
409	Conflict
410	Gone
411	Length Required
412	Precondition Failed
413	Request Entity Too Large
414	Request-URL Too Large
415	Unsupported Media Type
500	Server Error
501	Not Implemented
502	Bad Gateway
503	Out of Resources
504	Gateway Time-Out
505	HTTP Version not supported

Dun Error Codes

Error Number	Error Message
600	An Operation is Pending.
601	The port handle is invalid
602	The port is already open
603	Caller's buffer is too small
604	Wrong information specified
605	Cannot set port information
606	The port is not connected
607	The event is invalid
608	The device does not exist
609	The device type does not exist
610	The buffer is invalid
611	The route is not available
612	The route is not allocated
613	Invalid compression specified
614	Out of buffers
615	The port was not found
616	An asynchronous request is pending
617	The port or device is already disconnecting
618	The port is not open
619	The port is disconnected
620	There are no endpoints
621	Cannot open the phone book file
622	Cannot load the phone book file
623	Cannot find the phone book entry
624	Cannot write the phone book file
625	Invalid information found in the phone book
626	Cannot load a string
627	Cannot find key
628	The port was disconnected
629	The port was disconnected by the remote machine
630	The port was disconnected due to hardware failure
631	The port was disconnected by the user
632	The structure size is incorrect
633	The port is already in use or is not configured for Remote Access dialout
634	Cannot register your computer on the remote network
635	Unknown error
636	The wrong device is attached to the port
637	The string could not be converted.
638	The request has timed out
639	No asynchronous net available
640	A NetBIOS error has occurred
641	The server cannot allocate NetBIOS resources needed to support the client
642	One of your NetBIOS names is already registered on the remote network
643	A network adapter at the server failed
644	You will not receive network message popups
645	Internal authentication error
646	The account is not permitted to log on at this time of day
647	The account is disabled
648	The password has expired
649	The account does not have Remote Access permission
650	The Remote Access server is not responding
651	Your modem (or other connecting device) has reported an error
652	Unrecognized response from the device
653	A macro required by the device was not found in the device .INF file section
654	A command or response in the device INF file section refers to an undefined macro
655	The <message> macro was not found in the device .INF file section
656	The <defaultoff> macro in the device .INF file section contains an undefined macro
657	The device .INF file could not be opened
658	The device name in the device .INF or media .INI file is too long
659	The media .INI file refers to an unknown device name
660	The device .INF file contains no responses for the command
661	The device .INF file is missing a command
662	Attempted to set a macro not listed in device .INF file section
663	The media .INI file refers to an unknown device type
664	Cannot allocate memory
665	The port is not configured for Remote Access
666	Your modem (or other connecting device) is not functioning
667	Cannot read the media .INI file
668	The connection dropped
669	The usage parameter in the media .INI file is invalid
670	Cannot read the section name from the media .INI file
671	Cannot read the device type from the media .INI file
672	Cannot read the device name from the media .INI file
673	Cannot read the usage from the media .INI file
674	Cannot read the maximum connection BPS rate from the media .INI file
675	Cannot read the maximum carrier BPS rate from the media .INI file
676	The line is busy
677	A person answered instead of a modem
678	There is no answer
679	Cannot detect carrier
680	There is no dial tone
681	General error reported by device
682	Error Writing Sectionname
683	Error Writing Devicetype
684	Error Writing Devicename
685	Error Writing MaxconnectBPS
686	Error Writing MaxcarrierBPS
687	Error Writing Usage
688	Error Writing Defaultoff
689	Error Reading Defaultoff
690	Error Empty INI File
691	Access denied because username and/or password is invalid on the domain.
692	Hardware failure in port or attached device
693	Error Not Binary Macro
694	Error DCB not found
695	Error State Machines not started
696	Error State Machines already started
697	Error Partial Response looping
698	A response keyname in the device .INF file is not in the expected format
699	The device response caused buffer overflow
700	The expanded command in the device .INF file is too long
701	The device moved to a BPS rate not supported by the COM driver
702	Device response received when none expected
703	Error Interactive mode
704	Error Bad callback number
705	Error Invalid Auth state
706	Error Writing INIBPS
707	X.25 diagnostic indication
708	The account has expired
709	Error changing password on domain
710	Serial overrun errors were detected while communicating with your modem
711	RasMan initialization failure. Check the event log
712	Biplex port is initializing. Wait a few seconds and redial
713	No active ISDN lines are available
714	Not enough ISDN channels are available to make the call
715	Too many errors occurred because of poor phone line quality
716	The Remote Access IP configuration is unusable
717	No IP addresses are available in the static pool of Remote Access IP addresses
718	PPP timeout
719	PPP terminated by remote machine
720	No PPP control protocols configured
721	Remote PPP peer is not responding
722	The PPP packet is invalid
723	The phone number, including prefix and suffix, is too long
724	The IPX protocol cannot dial-out on the port because the computer is an IPX router
725	The IPX protocol cannot dial-in on the port because the IPX router is not installed
726	The IPX protocol cannot be used for dial-out on more than one port at a time
727	Cannot access TCPCFG.DLL
728	Cannot find an IP adapter bound to Remote Access
729	SLIP cannot be used unless the IP protocol is installed
730	Computer registration is not complete
731	The protocol is not configured
732	The PPP negotiation is not converging
733	The PPP control protocol for this network protocol is not available on the server
734	The PPP link control protocol terminated
735	The requested address was rejected by the server
736	The remote computer terminated the control protocol
737	Loopback detected
738	The server did not assign an address
739	The remote server cannot use the Windows NT encrypted password
740	The TAPI devices configured for Remote Access failed to initialize or not installed correctly
741	The local computer does not support encryption
742	The remote server does not support encryption
743	The remote server requires encryption
744	Cannot use the IPX net number assigned by the remote server. Check the event log
745	An Essential file is missing
752	A syntax error was encountered while processing a script

Outlook Express Error Codes

Error Code	Error Type	Description
0x800CCC00	LOAD_SICILY_FAILED	Authentication did not load.
0x800CCC01	INVALID_CERT_CN	Invalid certificate content
0x800CCC02	INVALID_CERT_DATE	Invalid certificate date.
0x800CCC03	ALREADY_CONNECTED	User already connected.
0x800CCC04	CONN
0x800CCC05	NOT_CONNECTED	Not connected to server.
0x800CCC06	CONN_SEND
0x800CCC07	WOULD_BLOCK
0x800CCC08	INVALID_STATE
0x800CCC09	CONN_RECV
0x800CCC0A	INCOMPLETE	Message download incomplete.
0x800CCC0B	BUSY	Server or maildrop is busy.
0x800CCC0C	NOT_INIT
0x800CCC0D	CANT_FIND_HOST	Cannot locate server.
0x800CCC0E	FAILED_TO_CONNECT	Cannot connect to server.
0x800CCC0F	CONNECTION_DROPPED	Connection closed.
0x800CCC10	INVALID_ADDRESS	Address not known on server.
0x800CCC11	INVALID_ADDRESS_LIST	Mailing list not known on server.
0x800CCC12	SOCKET_READ_ERROR	Unable to send Winsock request.
0x800CCC13	SOCKET_WRITE_ERROR	Unable to read Winsock reply.
0x800CCC14	SOCKET_INIT_ERROR	Unable to initialize Winsock.
0x800CCC15	SOCKET_CONNECT_ERROR	Unable to open Windows Socket.
0x800CCC16	INVALID_ACCOUNT	User account not recognized.
0x800CCC17	USER_CANCEL	User canceled operation.
0x800CCC18	SICILY_LOGON_FAILED	Logon attempt failed.
0x800CCC19	TIMEOUT
0x800CCC1A	SECURE_CONNECT_FAILED	Unable to connect using SSL.
0x800CCC40	WINSOCK_WSASYSNOTREADY	Network subsystem is unusable.
0x800CCC41	WINSOCK_WSAVERNOTSUPPORTED	Windows Sockets cannot support this application.
0x800CCC42	WINSOCK_WSAEPROCLIM
0x800CCC43	WINSOCK_WSAEFAULT	Bad address.
0x800CCC44	WINSOCK_FAILED_WSASTARTUP	Unable to load Windows Sockets.
0x800CCC45	WINSOCK_WSAEINPROGRESS	Operation now in progress.
0x800CCC60	SMTP_RESPONSE_ERROR	Invalid response.
0x800CCC61	SMTP_UNKNOWN_RESPONSE_CODE	Unknown error code.
0x800CCC62	SMTP_500_SYNTAX_ERROR	Syntax error returned.
0x800CCC63	SMTP_501_PARAM_SYNTAX	Parameter syntax incorrect.
0x800CCC64	SMTP_502_COMMAND_NOTIMPL	Command not implemented.
0x800CCC65	SMTP_503_COMMAND_SEQ	Improper command sequence.
0x800CCC66	SMTP_504_COMMAND_PARAM_NOTIMPL	Command not implemented.
0x800CCC67	SMTP_421_NOT_AVAILABLE	Command not available.
0x800CCC68	SMTP_450_MAILBOX_BUSY	Mailbox is locked and busy.
0x800CCC69	SMTP_550_MAILBOX_NOT_FOUND	Mailbox not found.
0x800CCC6A	SMTP_451_ERROR_PROCESSING	Error processing request.
0x800CCC6B	SMTP_551_USER_NOT_LOCAL	User mailbox is known, but mailbox not on this server.
0x800CCC6C	SMTP_452_NO_SYSTEM_STORAGE	No space to store messages.
0x800CCC6D	SMTP_552_STORAGE_OVERFLOW	Storage limit exceeded.
0x800CCC6E	SMTP_553_MAILBOX_NAME_SYNTAX	Invalid mailbox name syntax.
0x800CCC6F	SMTP_554_TRANSACT_FAILED	Transaction failed.
0x800CCC78	SMTP_REJECTED_SENDER	This is caused by having the incorrect e-mail address in the Reply-To field.
0x800CCC79	SMTP_REJECTED_RECIPIENTS	Server rejected recipients.
0x800CCC7A	SMTP_NO_SENDER	No sender address specified.
0x800CCC7B	SMTP_NO_RECIPIENTS	No recipients specified.
0x800420CB	POP3_NO_STORE	Mail cannot be stored on server
0x800CCC90	POP3_RESPONSE_ERROR	Client response invalid.
0x800CCC91	POP3_INVALID_USER_NAME	Invalid user name or user not found.
0x800CCC92	POP3_INVALID_PASSWORD	Password not valid for account.
0x800CCC93	POP3_PARSE_FAILURE	Unable to interpret response.
0x800CCC94	POP3_NEED_STAT STAT	Command required.
0x800CCC95	POP3_NO_MESSAGES	No messages on server.
0x800CCC96	POP3_NO_MARKED_MESSAGES	No messages marked for retrieval.
0x800CCC97	POP3_POPID_OUT_OF_RANGE	Message ID out of range.
0x800CCCA0	NNTP_RESPONSE_ERROR	News server response error.
0x800CCCA1	NNTP_NEWGROUPS_FAILED	Newsgroup access failed.
0x800CCCA2	NNTP_LIST_FAILED LIST	command to server failed.
0x800CCCA3	NNTP_LISTGROUP_FAILED	Unable to display list.
0x800CCCA4	NNTP_GROUP_FAILED	Unable to open group.
0x800CCCA5	NNTP_GROUP_NOTFOUND	Group not on server.
0x800CCCA6	NNTP_ARTICLE_FAILED	Message not on server.
0x800CCCA7	NNTP_HEAD_FAILED	Message header not found.
0x800CCCA8	NNTP_BODY_FAILED	Message body not found.
0x800CCCA9	NNTP_POST_FAILED	Unable to post to server.
0x800CCCAA	NNTP_NEXT_FAILED	Unable to open next message.
0x800CCCAB	NNTP_DATE_FAILED	Unable to display date.
0x800CCCAC	NNTP_HEADERS_FAILED	Unable to display headers.
0x800CCCAD	NNTP_XHDR_FAILED	Unable to display MIME headers.
0x800CCCAE	NNTP_INVALID_USERPASS	Invalid user or password.
0x800CCCC2	RAS_NOT_INSTALLED	RAS/DUN not installed.
0x800CCCC3	RAS_PROCS_NOT_FOUND	RAS/DUN process not found.
0x800CCCC4	RAS_ERROR	RAS/DUN error returned.
0x800CCCC5	RAS_INVALID_CONNECTOID	Connectoid damaged or missing.
0x800CCCC6	RAS_GET_DIAL_PARAMS	Error getting dial settings
0x800CCCD1	IMAP_LOGINFAILURE	Login failed.
0x800CCCD2	IMAP_TAGGED_NO_RESPONSE	Message tagged.
0x800CCCD3	IMAP_BAD_RESPONSE	Invalid response to request.
0x800CCCD4	IMAP_SVR_SYNTAXERR	Syntax error.
0x800CCCD5	IMAP_NOTIMAPSERVER	Not an IMAP server.
0x800CCCD6	IMAP_BUFFER_OVERFLOW	Buffer limit exceeded.
0x800CCCD7	IMAP_RECVR_ERROR	Recovery error.
0x800CCCD8	IMAP_INCOMPLETE_LINE	Incomplete data.
0x800CCCD9	IMAP_CONNECTION_REFUSED	Connection not allowed.
0x800CCCDA	IMAP_UNRECOGNIZED_RESP	Unknown response.
0x800CCCDB	IMAP_CHANGEDUID	User ID has changed.
0x800CCCDC	IMAP_UIDORDER	User ID command failed.
0x800CCCDD	IMAP_UNSOLICITED_BYE	Unexpected disconnect.
0x800CCCDE	IMAP_IMPROPER_SVRSTATE	Invalid server state.
0x800CCCDF	IMAP_AUTH_NOT_POSSIBLE	Unable to authorize client.
0x800CCCE0	IMAP_OUT_OF_AUTH_METHODS	No more authorization types.